【Capacity】: 1.8-88 t/h
【Disk diameter】: 600-2000 mm
【Max feeding size】: 25-80 mm
【Application】: a variety of non-sticky material metallurgy, mining, building materials, coal, electricity and other sectors of the feed.Email: [email protected]
The main function of the disk feeder/disc feeder is to provide material supply for other equipment. The use of the disc feeder enables the material to enter one equipment evenly so that the next process can work normally and saves labor moreover, the utility model protects the performance of the equipment and extends the service life of the whole production line equipment. Disc feeder is an indispensable accessory product of process mining.
A variety of non-adhesive material as an industrial feeder for transporting powder, or small material, such as coal, cement, clinker, limestone, shale, coal gangue, clay powder, granular or small block material.
We supply a series of ore feeder products, magnetic feeder, vibrating feeder design also available.
【Disk Feeder Working Principle】DisK feeder is composed of the driving device, feeder unit, belt conveyor for metering use and metering device. The feeder and belt conveyor is driven by a set of driving device. The driving device of the electromagnetic clutch can switch off or switch on the feeder. There is a speed inspecting device to test the belt conveyor speed which shall be less than 1m/s, and measuring bar to adjust the weighing roller's position to prevent deflection.
The feed port of the disc feeder is composed of the receiving sleeve and the adjustable adjusting sleeve under the receiving sleeve. The material falls from the receiving sleeve to the adjusting sleeve and then leaks out through the gap between the disc and the adjusting sleeve And the scraper scrapes the material of the disc. By adjusting the gap size between the set and the disc and the position of the scraper, the feeding quantity can be adjusted. The size of the receiving sleeve and the adjusting sleeve can be determined by the hourly feeding quantity of the disc feeder and the radius of the DISC The adjustment of the height of the sleeve is mainly by rotating the screw rod fixed on both sides of the sleeve to drive the sleeve up and down.
|Model||Disk Diameter||Rotate Speed(r/min)||Max.feeding size(mm)||Power(kw)||Capability (t/h)||weight(kg)|
If you have some questions about our products, please feel free to fill out the form below, and we will contact you within 24 hours. Rest assured that we won’t reveal your information to anyone.